Manual or automatic space saving roller shutter doors with a range of security levels to suit your needs
Internal Face Fixing - installed inside the opening where headroom inside isn't restricted.
External Face Fixing (Not Excel Higher Security) - installed outside infront of the opening where internal headroom is restricted.
Reveal Fixing (not Excel Higher Security) - maximised internal space whilst not obscuring exterior.
Top Box sizes (mm) vary depending on the roller height.
205mm headroom up to 2150mm, 300mm for up to 2500mm and 350mm up to 3500mm
Do you have old 'tired looking' garage doors, perhaps becoming more difficult to open with age or needing clear space inside or out before opening? Then why not consider upgrading with modern roller garage doors rather than just replacing with same type? At the Roller Garage Door Centre we can help - whether you are looking for garage doors to install yourself or have them professionally installed for you.
We specialise in providing only roller garage doors as we feel these are more beneficial in not only operating within a limited space compared to panel and up and over doors, but provide a better level of security and deterrent against would be intruders. They also benefit from a smoother, quieter operation and should a door ever become damaged only the dented slats need replacing.
Our electric garage doors can be automated for the ultimate ease of use and are manufactured to a quality to ensure safety and reliability for your peace of mind.
All door slats are constructed from high grade corrosion resistant aluminium with a CFC free foam core for thermal insulation and noise reduction.
Roller garage doors have no top box as standard but we can supply half or full box options. They are available in a range of low maintenance colours. Details and options can be found on each door type page.
Measuring up for your roller garage doors
Measure the Overall Guide Width and Guide Height for pricing. The Overall Guide Width is the Drive through width plus the Guide Rails.
75mm Guide Rails are supplied as standard for all door widths up to 4600mm. Doors over 4600mm wide come with 90mm guides.
Ideally measure in two places to allow for any misalignment of your existing opening.
We recommend 55mm of bottom slat should hang down into the guide rails when the door is fully raised. Below this is the Drive Through Height.
The Total Height is the Guide Height plus the Headroom needed for the top box end plate. (see right panel)
For roller garage doors contact 0118 981 7300
Roller Garage Doors Centre, based in the heart of Berkshire covering the UK with Roller Garage Doors. Ring today 0118 981 7300